Télécharger Imprimer la page

Unold Henry 86545 Notice D'utilisation page 25

Publicité

OPERATION
Note: The appliance display goes blank after about 3 minutes of inactivity. Press
any button to reactivate the display. Then you can make the desired settings.
To prevent damage to the appliance, do not place heavy objects on the table
surface. In this case, we unfortunately can assume no liability for damage.
1.
Observe all safety information.
2.
Make sure that you have chosen a safe location.
3.
Plug the power cord into a wall socket (220–240 V~, 50–60 Hz).
4.
A short signal will sound and the red ON symbol will appear at the upper
right of the display, indicating that the appliance is connected to the power
supply.
5.
Now press the ON/OFF button once. The fan heater starts operating with the
setting that was used last; air flows from the front of the heater table and
the display shows the current temperature.
Manual mode
6.
In manual mode the appliance does not monitor the room temperature;
instead, it operates independently at the current heat output setting. Press
the "HEAT" button to select the desired output. The indicator lamp at the
left of the display shows the selected setting.
ƒ Setting 1 for low heat output
ƒ Setting 2 for medium heat output
ƒ If no setting is selected, the fan operates with cool air. Caution: If the
appliance was used for heating before, the air exiting the appliance will still
be warm at first. The appliance will need some time to start blowing cool
air, depending on the previous heat setting.
Temperature control
7.
In this mode the desired room temperature is automatically maintained.
8.
With the "Temp" button you can set the desired heating temperature from
20–40 °C. Please note that the target temperature must always be higher
than the current room temperature.
9.
Press the button repeatedly until the desired target temperature is displayed.
10. The display briefly shows the selected temperature and then the current
room temperature.
11. As soon as the desired temperature is reached, it will be maintained. To
achieve this, the fan automatically switches on and off.
Stand 3.9.2024
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
25 von 92

Publicité

loading

Produits Connexes pour Unold Henry 86545