Publicité
DE
Display symbol
EN
FR
NL
IT
ES
PL
REMOTE CONTROL
24 von 92
Copyright UNOLD AG | www.unold.de
Remote symbol Name
Timer
Heat
ON/OFF
Light
Explanation
Time preset
Setting select button
ON/OFF switch
Switch ambient light on and
off (remote control)
1. Before using the remote control
for the first time, carefully remove the
thin plastic film by pulling it out. The
battery included inside makes contact
so you can use the remote control.
2. To replace the battery, use a coin
or similar object to remove the cover of
the battery compartment.
3. Use a button cell, type CR2025
only.
4. Watch out for correct polarity when
inserting the battery in the remote
control. The "+" side of the battery
must point upward.
5. Close the battery compartment and
screw down the cover.
Stand 3.9.2024
Publicité
