Publicité
The appliance is very hot during and after operation - danger of
DE
burn injuries!
EN
Do not use timers or other external switch-on / switch-off systems
to operate the appliance. Use of such items could unintentionally
FR
reset the overheating protection circuit and cause a fire hazard.
NL
To prevent overheating and the associated fire hazard, never
cover the appliance during operation.
IT
ES
Do not operate the appliance in the vicinity of sinks, bathtubs or
other containers filled with water. Never open the housing of the
PL
appliance. This can result in electric shock.
The manufacturer will not be liable in the event of incorrect assembly, improper or incorrect use or if
repairs are carried out by unauthorized third parties.
BEFORE THE FIRST USE
1.
Remove all packaging materials and any transport guards and stickers (not
the type plate or the serial number!). Keep the packaging material away
from children. Choke hazard! Dispose of the packaging material according
to the applicable statutory waste disposal regulations.
2.
Inspect the appliance for damage. If there is visible damage, do not operate
the appliance; instead, contact our customer service department.
3.
Comply with all instructions that are specified in the chapter, "The ideal
location", and find a suitable location.
4.
When you use the appliance for the first time, or if it has not been operated
for an extended period of time, a slight odour can occur.
ASSEMBLY
22 von 92
Copyright UNOLD AG | www.unold.de
1. The appliance must be fully assembled for
operation!
2. Before you use the fan heater, the three feet
must be mounted on the housing.
3. Turn the housing over so that the bottom is
facing upward.
4. Now screw the included feet clockwise into the
holes provided on the housing (see illustration).
5. Then turn the fully assembled housing upright.
Stand 3.9.2024
Publicité
