CoComm DT200 Manuel D'utilisation page 67

USER MANUAL
3. Press [
4. Press [
the word On will be displayed. The icon will appear in the
notification bar.
5. You can change the network name, security or password by
[ ] on Set up Wi-Fi hotspot.
6. To disable the function, press [
Troubleshooting
El teléfono no se puede encer
• Phone can not be turned on [ ] button for more than 5 seconds.
• Make sure battery is properly connected to your phone.
• Remove the battery, reinstall it and restart your phone.
• If the battery is low, recharge it.
Phone asks for PIN code
PIN lock feature is enabled. Each time the phone is switched on, PIN
must be entered (if you are using your phone for the first time, you must
enter the PIN code provided with SIM card).
Phone asks for PUK code
PIN code has been entered incorrectly three times, and now SIM card is
locked. Enter PUK code provided by your network operator.
Phone asks for unlock code
The automatic locking function has been enabled in the phone. You
must enter unlock code before you can use your phone.
] again for Portable Wi-Fi hotspot.
] on Off, the WI-Fi hotspot will be activated and
] on On.
67
EN