CoComm DT200 Manuel D'utilisation page 66

USER MANUAL
To deactivate the Bluetooth function, go to the Settings, and press
[ ] on Bluetooth, and press [
function will then disconnect automatically. You can also turn the
Bluetooth function On and Off from the Switch screen.
WiFi connection
Setting up a Wi-Fi networks connection
1. Select the icon
[ ] to access the system settings menu. Use the arrow
keys [
2. Press [
the word On. All available Wi-Fi networks will be displayed.
3. Use the arrow keys [
and press [
4. Enter the password, and use the arrow keys [
Connect and press [
When the Wi-Fi function is on, the icon will be displayed in the notification
bar. When the device is connected to a Wi-Fi network, the icon will
change. A Wi-Fi network that has been previously configured and is
within range of the device will connect directly when the Wi-Fi feature is
enabled. You can turn Wi-Fi On and Off from the Switch screen.
Activar punto de acceso Wi-Fi
1. Select the icon
to access the system settings menu. Use the arrow keys [
[ ] to select Wire networks settings and press [
2. Use the arrow keys [
hotspot and press [
within the application menu, and press
] [ ] to select Wi-Fi and press [
] on Off, the Wi-Fi function will be activated and display
] [
]. A pop-up screen will appear.
within the application menu, and press [
] again on On. The Bluetooth
] to select the desired Wi-Fi network
].
] [ ] to select Tethering & portable
].
66
EN
] to access.
] [ ] to select
] to access.
]
]