CoComm DT200 Manuel D'utilisation page 44

USER MANUAL
2. Follow the same process if you want to install a micro-SD
card, although this time slide the metallic cover to the left
to unlock it, as shown in the illustration. Place the memory
card, and then lower the metallic cover and slide to its initial
location to lock it.
3. Insert the battery in its compartment, making sure the
electrodes of the connectors from the terminal match the
slots in the superior side of the battery, as indicated in the
image. Reposition the cover of the battery compartment, and
verify that it is correctly in place.
44
EN