Publicité
20 | English
Light temperature button
(4)
Press 1×
Press 2×
Temperature Dependent Overload Protection
If the permissible operating temperature is exceeded, the cordless worklight switches it-
self off. To continue using the cordless worklight, let it cool down.
Practical Advice
Carry the cordless worklight by its handle (2).
The light head (1) becomes hot during operation. Let the cordless worklight cool down
before adjusting it or transporting it.
Do not leave the cordless worklight unattended while it is switched on.
The cordless worklight will flash three times just before it is about to switch off due to an
empty battery.
Attaching the cordless worklight
You can use the hook (7) and the magnet (6) to attach the cordless worklight to suitable
objects.
Always check the worklight is positioned on a stable surface/object and is not too close
to heat-sensitive or flammable objects.
Avoid scratching delicate surfaces.
Charging External USB Devices (see figure B)
Ensure that your external USB device can be charged via the USB Type-C® port
u
on the cordless worklight. Refer to the relevant specifications in the "Technical
Data" section.
Connect the charging cable of your USB device to the USB Type-C® port (9). Press the
USB button (3) of the cordless worklight to start the charging process.
The charging process is terminated as soon as a fully charged battery is detected. Dis-
connect the charging cable from the USB Type-C® port (9) to preserve the battery of the
external USB device.
1 609 92A 93A | (15.12.2023)
Light temperature
Warm white
Cold white
Bosch Power Tools
Publicité
