Publicité
HOW TO STOP – FIGURE 4
4.
Put the legs together, fold the knees slightly and press the brake roller, tilting it backwards so as to obtain friction of the
brake with the ground. Another option of stopping is by moving the leg, which is further back, to the side so that an angle of
90 degrees is formed with the heel of the foot, which is further ahead (like the letter T). Determine in a stationary position
which of the two legs will make it easier for you to be in front and which – at the back. How to reduce the speed – move your
weight to the leg, which is at the back gradually, this will increase friction and reduce speed.
ADJUSTING THE SIZE
Your quads are adjustable and can fit to size from 26 to 29. The adjusting is available when you open the plastic part settled on the back side of the
quad, rotate it counterclockwise until you get the desired size marked on the side of the shoe and pointed by the arrow on the upper part. Please,
note when readjust the sizes to be sure that both shoes are same size and that you have locked the plastic part back.
INSTRUCTIONS FOR USE
Before each use, make sure that:
•
The retaining mechanism is locked in place and that the plastic buckles remain firmly engaged where available.
•
The roller skates is correctly assembled, and handlebar is correctly adjusted.
•
All locking devices and self-locking attachments are switched on and in full working order.
•
The wheels are tightened at the axles and rotate well. If there is any friction or the wheels totters, you must immediately stop using the
product.
IMPORTANT! Remember that over time, the self-locking nuts and other self-locking elements can lose their effectiveness.
CARE AND MAINTENANCE
Keeping the roller skates clean and in good working order will extend its life and function while maintaining your child's safety.
•
Regularly clean with a soft, wet cloth, after that wipe dry. Do not use abrasive cleaning agents.
•
The bearings are adjusted to the wheels of the fixed type which means that they require little to no maintenance. They are cleaned with
dry cloth and are to be oiled. This increases their period of use and improves the exploitation qualities of the roller skates.
•
Make sure that the area around the wheels is kept clean and no mud is left on it. Oil the bearings regularly. Do not ride theroller skates in
wet weather. If you have rode it in wet weather, afterwards wipe it dry thoroughly.
•
Do not leave the product exposed to the negative effects of external factors such as rain, snow and direct sunlight.
•
Keep the roller skates in dry and well-ventilated places.
8
Publicité
