Samsung PN50A450P1D Guide De L'utilisateur page 33

4 Press the ▲ or ▼ button to select Picture, Option then press the ENTER
button.
Press the ▲ or ▼ button to select D Effect then press the ENTER button.
5 Press the ▲ or ▼ button to select Mode, then press the ENTER button.
Press the ▲ or ▼ button to select Off, Mode1 or Mode then press the
ENTER button.
• Off : Turns the 3D Effect function off.
• Mode1 : Mode 1 operates with right sync first.
• Mode : Mode 2 operates with left sync first.
You should choose Off to end 3D Effect completely.
➢
If the 3D effect is not working properly, it means the Mode and 3D
➢
glasses may not be syncing properly. To put them in sync, switch to the
other mode.
Changing the Format
Select the optimal input format to match your graphic cards or 3D Software.
See the descriptions for Steps 1 to 4 above.
5 Press the ▲ or ▼ button to select Format, then press the ENTER button.
6 Press the ▲ or ▼ button to select Checkerboard, Horizontal or Vertical
then press the ENTER button.
If the output format of your graphic card or 3D
Checkerboard software is Checkerboard, select this input
format.
If the output format of your graphic card or 3D
Horizontal software is Horizontal interleaved, select this
input format.
If the output format of your graphic card or 3D
Vertical software is Vertical interleaved, select this input
format.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select D Effect.
3 Press the ENTER button to start the 3D Effect.
Resetting the Picture Settings to the Factory Defaults
1 To select the desired picture mode, follow the Activating Picture Options
instructions numbers 1 and 2. (see page 26)
 Press the ENTER button to select Picture.
Press the ▲ or ▼ button to select Reset, then press the ENTER button.
Press the ◄ or ► button to select OK or Cancel then press the ENTER button.
Press the EXIT button to exit.
➢ Each mode can be reset.
All manuals and user guides at all-guides.com
English - 
T V Picture
▲ More
Detailed Settings
Picture Options
Reset : OK
Move Enter Return
T V Picture Options
▲ More
Screen Burn Protection
3D Effect
Move Enter Return
T V D Effect
Off
Mode :
Mode 1
Format :
Mode 2
Move Enter Return
T V D Effect
Mode : Mode 1
Format :
Checkerboard
Horizontal
Vertical
Move Enter Return
Tools
3D Mode ◄ Off ►
Anynet+ (HDMI-CEC)
Picture Mode : Dynamic
Sound Mode : Standard
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Move
Adjust Exit
T V Picture
▲ More
Detailed Settings
Picture Options
Reset :
OK
Cancel
Move Return
Enter
►
►
►
►
►