Publicité
NOTE:
The dishwasher door must not be blocked
when set to open automatically.
This can disrupt door lock functionality.
The rapid and soak program do not have the
Auto open function.
Change the Program...
Premise:
1. A cycle that is underway can only be modified if it has only
been running for a short time. Otherwise, the detergent
may have already been released, and the appliance may
have already drained the wash water. If this is the case, the
detergent dispenser must be refilled (see the section entitled
"Loading the Detergent" ).
2. Open the door, the machine will be in standby state, press
the program button more than 3s then you can change the
program to the desired cycle setting (see the section entitled
"Starting a wash cycle..." ).
The front indicator show the state of dishwasher:
a). Blue light with illuminating: running;
b).blue light without blinking: pause;
c). no light: stand by
GB
95
Publicité
