Publicité
Turning On the Appliance
Starting a cycle wash
1. Draw out the lower and upper basket, load the dishes and
push them back. It is commended to load the lower basket
first, then the upper one (see the section entitled "Loading the
Dishwasher").
2. Pour in the detergent (see the section entitled "Salt, Detergent
and Rinse Aid").
3. Insert the plug into the socket. The power supply is 220-
240VAC / 50HZ, the specification of the socket is 10A 250VAC.
GB
Make sure that the water supply is turned on to full pressure.
4. Press the program button, the wash program will be changed
as follows direction: ECO->Glass->90min->Rapid->Soak
->Auto->Intensive->Universal;
5. If a program is selected, the response program indicator will
light, then you can also choose the desired function, close the
door, the dishwasher will start working.
Auto Open
After washing, the door will open automatically to achieve better
drying effect.
94
Publicité
