Publicité
Filling The Rinse Aid Reservoir
Remove the rinse reservoir cap
by lifting up the handle .
GB
Close the cap after all.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the
dishwasher is designed to adjust the consumption by user. Follow
the below steps.
1. Open the door and switch on the appliance.
2. Within 60 seconds after step 1, press the Program button
more than 5 seconds, and then press the Delay button to enter
the set model, the rinse aid indication blinks as 1Hz frequency.
3. Press the Program button to select the proper set according to
your using habits, the sets will change in the following
sequence: d3->d4->d5->d1->d2->d3. The higher the
number, the more rinse aid the dishwasher uses.
84
Pour the rinse aid into the
dispenser, being careful not to
overfill.
Publicité
