Publicité
ASSEMBLING THE TAPERED/
SPREAD NOZZLE
1 Remove the battery pack.
2 Align the groove in the tapered nozzle
with the peg on the tube. Push the
nozzle onto the tube until it snaps into
place (Fig. 3a & 3b).
3 To remove the tapered nozzle, press
and hold the nozzle-release button
to disengage the latch, then pull the
nozzle straight from the blower tube
(Fig. 3c).
Follow the same sequence to assemble or
remove the spread nozzle.
18
56-VOLT LITHIUM-ION CORDLESS BLOWER — LB8800/LB8800-FC
3a
3b
3c
a
Peg
Nozzle-release
Button
b
Publicité
