Bestway 58381 Manuel Du Propriétaire page 3

TECHNICAL SAFETY INSTRUCTIONS
• The appliance must be supplied by a grounded power source.
• Extension cords can't be used.
• In case of damage to the filter pump, do not use the pool.
• Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers, and other equipment.
• This pump is for use with storable pools only. Do not use with permanently-installed pools. A storable
pool is constructed so that it is capable of being readily disassembled for storage and reassembled to
its original integrity. A permanently-installed pool is constructed in or on the ground or in a building such
that it cannot be readily disassembled for storage.
• Using the pump with an unmatched electrical supply is dangerous and will result in catastrophic
failure of pump.
• When working with electricity, turn the electrical power off at the circuit breaker and lock breaker door.
Failure to do so will result in increased risk of shock, injury and possibly death.
• Do not remove the grounding prong or modify the plug in any way. Do not use adapter plugs. Consult a
qualified electrician for any questions related to the validity of your plug's grounding.
• Handle the pump with care. Do not pull or carry the pump by the power cord. Never pull a plug from the
outlet by yanking the power cord. Keep cord free from abrasions. Sharp objects, oil, moving parts, and
heat should never be exposed to the filter pump.
• Cleaning and user maintenance must be performed by an adult above 18 years old who is familiar with
the risk of electric shock.
• Consult a qualified electrician for any questions.
• In case of doubt on the pump or any circulation devices, contact a qualified installer, or the
manufacturer/importer/distributor.
• Mind all the safety requirements and recommendations described in the manual.
• Please examine equipment before use. Notify Bestway at the customer service address listed on this
manual for any manufacturing defect or missing parts at the time of purchase. Verify that the equipment
components represent the filter pump model that you had intended to purchase.
• Atmospheric conditions may affect the performance and life span of your filter pump. Unnecessary wear
and tear may occur during periods of cold, heat and exposure to sun. Whenever possible, shelter the
pump from these conditions.
• It is important to ensure the factory equipped stopper plugs for the inlet and outlet ports replace the screens
before removal or maintenance on the pump is attempted.
• Do not add chemicals in the filter pump.
• Don't plug or unplug the appliance if your hand is wet.
• Always unplug the appliance: on rainy days, before cleaning or other maintenance, and when leaving it
unattended on holidays.
• This product is not intended for commercial use.
ATTACHING A BASE
FOR 330GAL
EN60335-2-41 TEST standard requires the filter pump to be vertically
fixed on the ground or a base made of wood or concrete before use.
There should be two holes 9 mm in diameter on the base, the space
between which should be 127 mm. Put filter pump on the base and attach
them together by fastening the bolts and nuts. All the base parts should
weigh at least over 18 kg to prevent the pump from accidentally falling.
FOR 530GAL
EN60335-2-41 TEST standard requires the filter pump to be vertically
fixed on the ground or a base made of wood or concrete before use.
There should be two holes 9 mm in diameter on the base, the space
between which should be 159 mm. Put filter pump on the base and attach
them together by fastening the bolts and nuts. All the base parts should
weigh at least over 18 kg to prevent the pump from accidentally falling.
FOR 800GAL
EN60335-2-41 TEST standard requires the filter pump to be vertically
fixed on the ground or a base made of wood or concrete before use.
There should be two holes 9 mm in diameter on the base, the space
between which should be 166 mm. Put filter pump on the base and attach
them together by fastening the bolts and nuts. All the base parts should
weigh at least over 18 kg to prevent the pump from accidentally falling.
3
2-M8 nut
2-M8 bolt
2-M8 nut
2-M8 bolt
2-M8 nut
2-M8 bolt