Theben LU 361 PE Manuel D'utilisation page 18

Manuale_LU361
Fig. 2
B. Installation Procedure
Switch off power supply before installation.
1. Please read the instruction manual carefully before installation
2. Be sure all power supply is switched off.
18
3. To install the sensor, please drill a hole (diameter of 65 mm) on the
ceiling and keep the power cable above ceiling board (SeeFig. 3) .
Fig. 3
2004.2.17 7:33 PM
A
Drill a hole with
Ø = 65mm on the ceiling
Page 18
B
Signal cable
for LU 361 PE-S