Publicité
9094954
5.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with the
moving parts of a tool. Keep long hair covered or bound.
3.
Do not overreach when operating a tool. Proper footing and balance
enables better control in unexpected situations.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Only use this device on a surface that is stable, level, dry and not
slippery, and capable of sustaining the load.
4.
Do not exceed the overall maximum load capacity. The weight rating is
based on an evenly distributed load.
5.
Use only with floor jacks.
6.
Always ensure the load is secured properly to the device.
7.
Do not use on any jack where the connection bolt does not attach
securely and tighten completely.
8.
Always use included safety chain to prevent overextension.
9.
Never move any load that is currently in use on the cross beam.
10. If lifting a vehicle, always follow the vehicle' s specific manufacturer
recommendations.
11.
Adjust the pads to always keep bar level during lifting.
12. Always support any load appropriately once it has been lifted.
4
Floor Jack Steel Cross Beam
For technical questions call 1-800-665-8685
V1.1
Publicité
