Publicité
Instructions for the installer
4.7 Fitting the telescopic guides
Proceed as follows to install:
•
remove the telescopic guides A from the packing and remove all protective film;
•
remove all the accessories that are inside the oven;
•
position the telescopic guide to the required height by coupling the upper side to the frame
(detailed drawing 1) and then rotate it until the lower side couples; repeat this operation for the
opposite side and the other levels;
•
slide the telescopic guides forward and position the chosen accessory as shown in detailed
drawing 2;
•
reinsert the previously removed accessories into the oven.
17
Publicité
