4.4 Stability feet
The cooker comes with standard feet installed. To ensure the stability of the cooker it is mandatory to fit
the extra feet provided.
The feet are not suitable for moving the appliance over long distances.
Before turning the cooker over, we recommend removing all the parts that are not stably attached to it. To
lighten the weight of the cooker, the accessories inside the oven may also be removed, thereby preventing
accidental damage during the overturning operation.
Proceed in either of the following ways
to fit the feet:
A
B
Remove the feet from the packing and
screw them to the bottom of the cooker.
Make the final adjustment of the feet, to level the cooker to the floor, after completing the electrical
connections.
4.5 Anti-Tip Bracket Installation
Tip-Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been installed.
Ensure the anti-tip bracket is engaged when the range is moved.
Do not operate the range without the anti-tip bracket In place.
Failure to follow these instructions can result in death or serious burns to children and adults.
The anti-tip bracket shipped with the range must be properly secured to the rear wall or floor as
shown in the pictures below. Slide the range against the wall until the brackets are fully inserted
into their receptacles on the back of the range.
14
Instructions for the installer
Lifting the cooker off the floor.
Laying the cooker on its back.