Télécharger Imprimer la page

steel GQY9S-5FI Manuel D'installation page 12

Publicité

4.2 Cutout Requirements
The unit must be coated with heat-resistant material
(minimum 194°F / 90°C).
Leave the minimum clearances suggested in the diagram.
This range may be installed directly adjacent to existing countertop high cabinets (36" or 91,5 cm
from the floor). For the best look, the worktop should be level with the cabinet countertop. This can
be accomplished by raising the unit using the adjustment spindles on the legs.
ATTENTION: the range CANNOT be installed directly adjacent to kitchen walls, tall cabinets, tall
appliances, or other vertical surfaces above 36" (91,5 cm) high. The minimum side clearance in
such cases is 6" (15,2 cm).
Wall cabinets with minimum side clearance must be installed 18" (45,7 cm) above the countertop
with countertop height between 35"
cabinets above the range shall be 13" (33 cm).
12
Instructions for the installer
(90 cm) and 36"
7
3
/
/
16
16
(92 cm). The maximum depth of wall

Publicité

loading

Ce manuel est également adapté pour:

Aqy9s-5fi