Publicité
4.6 Fitting the front moulding
For some cooker models, a front moulding is available to complement its aesthetics.
Before turning the cooker over, we recommend removing all the parts that are not stably attached to it. To
lighten the weight of the cooker, the accessories inside the oven may also be removed, thereby preventing
accidental damage during the overturning operation.
4.6.1 Genesi series cooker
The moulding is supplied as a standard fitting with the Genesi series.
To assemble, proceed as follows:
•
•
•
•
16
Instructions for the installer
tilt the cooker backwards;
align the moulding A with the mounting position as shown in the illustration;
apply the moulding until it fits into the mounting position;
pull the moulding downward so that it hooks onto the 4 pins B (two on each side) present on
the cooker.
Publicité
