Publicité
Manual_FX-E1HAS20_Int24_rev01
Use and handling of the power tool
- Do not overload the device. Use the power tool intended for the work you are doing. With the right
power tool, you can work better and more safely within the specified power range.
- Do not use a power tool if the switch is defective. A power tool that cannot be switched on or off is
dangerous and must be repaired.
- Disconnect the power tool from the power outlet and/or remove the battery pack before making
any adjustments, changing accessories or storing the tool. This precaution will prevent the power
tool from starting accidentally.
- Store idle power tools out of the reach of children. Do not allow persons unfamiliar with the
appliance or these instructions to operate the appliance.
have not read it. Power tools are dangerous when used by inexperienced persons.
- Maintain power tools with care. Check that moving parts are working properly and are not
jamming, that parts are not broken or damaged in such a way that the function of the tool is
impaired.
power tool is impaired. Have damaged parts repaired before using the device. Many accidents are
caused by poorly maintained power tools.
- Keep cutting tools sharp and clean. Carefully maintained cutting tools
with sharp cutting edges jam less and are lighter
to lead.
- Use the power tool, accessories, tool bits, etc. in accordance with these instructions. Take into
account the working conditions and the work to be carried out. Using power tools for purposes other
than those intended may result in
lead to dangerous situations.
62
Publicité
