Publicité
TO-114308.6
FUNCTIONAL CHARACTERISTICS
1.
Toast aperture
2.
Cancel switch
3.
Electric browning control
4.
Removable crumb tray
5.
Bun warmer
6.
Toasting lever
BEFORE USE
1.
Place the toaster on a flat and heat resistant surface. Make sure that there is enough ventilation around the
toaster.
2.
Before using the toaster for the first time, clean your toaster (see Chapter "CLEANING AND MAINTENANCE").
Operate the toaster at least twice without bread and on the highest setting. Ventilate the room during this
period.
3.
This appliance may emit a characteristic smell when you switch it on for the first time. This is normal, and no
harm.
4.
Make sure the crumb tray is placed tightly on the bottom of the toaster.
INSTRUCTIONS FOR USE
1.
Insert the power plug into the socket.
2.
Insert up to two slices of bread in the browning slot.
3.
Use the browning control switch to select the desired degree of browning between 1 and 7 (1 = lightest; 7 =
darkest degree of browning). No. 4 is recommended for first use. The degree of browning chosen depends
on the type of bread and individual taste.
4.
Press the toasting lever down until it engages. The toasting process starts automatically.
5.
Please remember that the toasting lever will not engage if the power plug is not inserted in the socket.
6.
The toaster switches itself off automatically and the toasted bread is ejected when the desired degree of
browning has been reached. The "CANCEL" switch can always be used to cancel the browning process.
NOTE:
(1) Do not place any rolls etc. directly on the toast aperture but place them on the bun warmer.
(2) The bun warmer is foldable. When the bun warmer is needed, pull the rack outward and put it on the
toaster. If the bun warmer is not needed, fold up the rack and deposit.
(3) Make sure if toasting on the bun warmer, do not insert bread into the toast aperture. A fire may occur.
(4) The degree of browning for one slice is darker than that for two slices of bread at the same level.
(5) 1 minute interval between each toasting can get the same degree of browning for different batch of
toasted bread.
(6) Oversized food, metal foil packages or utensils must not be inserted in the toaster as they may cause fire
or electric shock.
CLEANING AND MAINTENANCE
1.
Before cleaning, make sure that you have switched off the appliance and removed the power plug from the
socket. Let the toaster cool down first.
2.
Pull the crumb tray out to clean it up, reset it before using the appliance again.
3.
Clean the outside of the toaster with a slightly damp cloth and wipe it dry with a soft cloth. Never dip the
toaster in water to clean it!
- 5 -
EN
Publicité
