Connection - Calira Ladeautomat LG 415/24-DS/IU Mode D'emploi

& $
connections (large cage tension spring clamps) must be stripped 12–13 mm.
Cable end sleeves are not required.
The tension spring clamp can be opened with the help of a suitable flat
screwdriver.
* To do so, insert the flat screwdriver into the lower, square opening (fig. 3)
and open the tension spring clamp (fig. 4). The clamping element of the
spring in the upper, round opening opens.
* Insert the cable into the cage tension spring clamp up to the isolation
(upper, round opening, fig. 4) and pull out the flat screwdriver (fig. 5). The
tension spring clamp closes again and the cable is securely clamped.
* Repeat the procedure for all connections:
B+, battery +, battery -.
Make sure that the cable ends sit firmly in the cage tension spring clamps!
Cage tension spring Flat screwdriver
clamp

Connection

1 , !
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
'
! "# $%
Cable
0
0
11