Calira Ladeautomat LG 415/24-DS/IU Mode D'emploi page 30

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

&
Remark! If the length of the provided cables should not be sufficient, use the
following cable lengths and cross-sections as a substitute.
Only use the specified cross-sections
and fuses with the correct rated current!
Positive
Length up to 3 m
charging cable
Cable cross
red
section: 4 mm².
Negative
Length up to 3 m
charging cable
Cable cross
blue
section: 4 mm².
Measuring
For length of up
cable B+ red
to 10 m, cable
cross-section
0.75 mm².
Connect the charger to the battery in accordance with the connection diagram.
Use the provided cables to do this. Pay attention to the cable cross-sections and
ensure correct polarity.
* Connect the negative charging cable for the battery (blue 4 mm²) to
negative output of the device and the negative pole of the battery.
* Connect the positive charging cable for the battery (red 4 mm²) to the
positive output for the battery of the device and the positive pole of the
battery. For cable lengths of over 1 m, this cable must be equipped with a
30 A fuse near the positive pole of the battery!
* Connect the measuring cable (red 0.75 mm²) to the B+ input of the device
and the positive pole of the battery. For cable lengths of over 1 m, this
cable must be equipped with a 2 A fuse near the positive pole of the
battery!
If you are using a charge control panel, connect it to the 7-pole LK-Panel
connection at the device.
12
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806
$
'
! "# $%
Length up to 6 m
Length over 6
Cable cross
m, cable cross
section: 6 mm².
section:
10 mm².
Length up to 6 m
Length over 6
Cable cross
m, cable cross
section: 6 mm².
section:
10 mm².

Publicité

Table des Matières
loading

Table des Matières