Connection Diagram - Calira Ladeautomat LG 415/24-DS/IU Mode D'emploi

& $ '
! "# $%
If you are using a temperature sensor for the battery, stick the temperature
sensor to the face of the battery. To do so, remove the protective plastic film
from the sticking spot of the temperature sensor and press it firmly to the
desired position at battery (see description of temperature sensor). Connect the
cable of the temperature sensor to the temperature sensor connection of the
device (2-pole connection).
When the device is delivered, it is set to operation with liquid electrolyte
batteries. If necessary, set the battery type (liquid or gel) of your battery at the
changeover switch.
Connect the mains cable to the power distribution of your boat, mobile home or
caravan.
Connect the green/yellow cable to the earth circuit!
Check that all the connections are firm and secure.
Finally make the mains connection with the female device plug of the mains
cable.

Connection diagram

( , ,
,
13
Lerchenfeldstr. 9 87600 Kaufbeuren Tel.: +49(0)8341 / 9764-0 Fax: +49(0)8341 / 67806