Publicité
OPERATION
USINg THE ROTATINg REAR HANDLE
1. Place the hedge trimmer on a flat and even surface.
2. Make sure that you released the trigger.
3. Press the lock button and begin turning the rear handle. Release the lock button and turn
the handle 90 degrees to either side until it clicks into place and the button pops out.
4. To turn the handle back to center, press the lock button again, turn the handle slightly,
release the lock button and continue turning the handle until it locks into place.
Lock button for rotating handle
(See Figure 4.)
14
Fig. 4
Publicité
