Menu 04 Vedi Tarature (See Calibrations); Menu 02 Set Crono (Set Chrono); Start Program - Elledi Star 10.2 C Manuel D'utilisation Et D'entretien

MENU 04 VEDI TARATURE (See calibrations)

In this menu it is possible to verify the values of parameters set in the control unit. This menu us used by C.A.T. (Technical After-Sales
Service) in order to understand what parameters are set in the machine and therefore find modifications that improve stove operation.
To enter this menu, follow this procedure:
1. Keep the P4 button pressed for 2 seconds the wording MENU SET OROLOGIO (Set clock menu) appears.
2. Press the P4 key 5 times: the screen will show MENU ORE LAVORO (Work hours menu).
3. Access with key P6: the screen will display the desired screen.
4. Scroll using the P6 or P7 keys to display parameters set.
5. Scrolling up to the last parameter goes automatically back to the MENU' 04 VEDI TARATURE (See calibration).

MENU 02 SET CRONO (Set Chrono)

With the chronothermostat it is possible to programme start-up and shut-down for the stove for each day of the week in two independent
temporal intervals (PROGRAM 1 and PROGRAM 2).
To enter this menu, follow this procedure:
1. Keep the P4 button pressed for 2 seconds the wording MENU SET OROLOGIO (Set clock menu) appears.
2. Press the P4 key 1 time: the screen will display MENU 02 SET CRONO (Set Chrono).
3. Access with key P6: the screen will display the desired screen.
Description
START PROG - 1
STOP PROG - 1
Giorno (Day) PROG - 1
POTENZA (Power) PROG - 1
SET TAMB PROG - 1
START PROG - 2
STOP PROG - 2
Giorno (Day) PROG - 2
POTENZA (Power) PROG - 2
SET TAMB PROG - 2
START PROG: this parameter indicates the time PROGRAMS 1 and 2 start-up.
STOP PROG: this parameter indicates the time PROGRAM 1 and 2 shut-down.
GIORNO (Day) PROG: using this parameter it is possible to set the days where program 1 and 2 are to be activated. To adjust this
parameter, complete the following procedure:
set the desired day (the days are Monday, Tuesday, using the P5 key and using P4 key, select the ON - OFF value; if OFF is set,
programming is not activated the desired day, if ON is set, programming will be valid. Once the operation is terminated, press P6 and
move on to the next setting.
POTENZA (Power) PROG: this parameter indicates the power of the stove when started with CRONO TEMPERATURA PROG
(Chrono Temperature Prog) : this parameter indicates the ideal temperature to be reached in the room where the stove is installed
during start-up with CRONO active. This setting is written over the one set in manual work conditions.
STAR 10.2 C- STAR 12.2 C
Use and maintenance manual
START
PROGRAM 1
Values that can be set
From OFF to 23:50 with 10' increments
From OFF to 23:50 with 10' increments
Toggle between on/off for days between Monday and
Sunday
From 01 to 05
From 7 ° to MAN
From OFF to 23:50 with 10' increments
From OFF to 23:50 with 10' increments
Toggle between on/off for days between Monday and
Sunday
From 01 to 05
From 7 ° to MAN
10:00
If this black segment is not turned on in correspondence of the clock symbol
on the display, it will however be possible to complete programming. In make
this function operational, refer to the chapter dedicated to setting the current
date, (7.1.2 MENU 01 SET OROLOGIO) (Set clock) since the value must be
different from OFF.
Rev.1 03/08/2017
Page 48
EN