Introduction; Caution; Warning; Information - Elledi Star 10.2 C Manuel D'utilisation Et D'entretien

Introduction

Caution:

It is recommended to carefully read this manual, describing all operations necessary for perfect stove operation.

Warning:

The regulations related to installation and operation contained in this manual may be different from local current regulations. In this
case one must always respect instructions on the part of local competent authorities. The drawings contained in this manual are
indicative and not in scale.

Information:

The packaging used offers good protection against damages as a result of transport. In any case, check the stove immediately after
delivery, in case of possible visual damages, quickly inform your Elledi reseller.

Use and maintenance manual description:

Through this use and maintenance manual, Elledi is supplying the user with all information regarding stove use safety, in order to
avoid damages to property, persons, or parts of the actual stove.
p
leaSe carefully read thiS manual before uSe and any intervention on the product

Warnings:

The Elledi stoves are manufactured paying careful attention to each individual component, in order to protect both the user and the installer
from the danger related to possible accidents. It is recommended for authorised personnel to pay careful attention to electrical connections
after each intervention on the product.
Installation must be completed by authorised personnel, who must give the purchaser a system conformity declaration, taking full
responsibility for final installation and resulting proper operation of the product installed. It is necessary to consider, both during the
installation phase and during use, all national, regional, provincial and municipal laws and regulations present in the Country where the
equipment is installed. There shall be no liability on the part of Aico S.p.A. if these precautions are not followed.
This manual is an integral part of the product: make sure that it is always supplied with the stove, even if sold to a different owner or user,
or if it is transferred to a different place. In case of damage or loss, request a copy of the manual from technical service.
This stove must be destined to the use it was specifically designed for. Do not use the equipment as incinerator or in any other manner
that is different from what it was conceived for. Any contractual and non-contractual liability of the manufacturer is excluded for damages
to persons, animals or property due to installation and maintenance adjustment errors and improper use. No fuel outside of pellet must be
used. Do not use liquid fuels.
After removing the packaging, ensure integrity and completeness of the content.
All of the stove's electrical components must be exclusively replaced by an authorised technical after-sales service using original pieces.
Stove maintenance must be completed at least once a year, and programmed ahead of time with the after-sales technical service. Do not
carry out any unauthorised modifications to the equipment.
For safety it is important to remember that:
-
The equipment can be used by children aged over 8 years old and by persons with reduced physical, sensorial or mental capacities,
or with no experience or knowledge, provided they are supervised or after having received instructions on safe use of the equipment
and on understanding the dangers related to it. Children must not play with the equipment. Cleaning and maintenance intended to
be carried out by the user must not be carried out by unsupervised children.
-
touching the stove while bare feet and wet parts of the body is not recommended;
-
it is prohibited to modify safety or adjustment devices without authorisation or instructions on the part of Aico S.p.A.
-
It is forbidden to install the equipment in rooms smaller than 15 m
atmosphere, etc.
-
it is prohibited to pour pellet directly into the brazier before an ignition;
-
before connecting the equipment, verify that water supply pressure does not exceed 2.5 bar (only hydro model);
-
The equipment works exclusively with wood pellets, do not fuel the stove with a different fuel.
-
During the first ignition it is normal for the product to emit smoke / bad odour due to thermal stabilisation of the paints. Keep the
installation area well ventilated for a few days or until the odour is gone.
When the stove is running, it may reach high temperatures to the touch, especially on its external surfaces: pay attention in order to avoid
burns.
The stove was designed to operate under any climactic condition, in case of particularly harsh conditions (wind, frost) safety systems that
stop stove operation may intervene.
If that should occur, contact technical after-sales service and, in any case, do not disable safety systems.
a
ll of our sToves are TesTed
20 . T
minuTes races of pelleT
normal and indicaTe ThaT The machine has passed all qualiTaTive and operaTional TesT aT The end of The producTion line
do noT indicaTe ThaT The sTove is used
.
process
STAR 10.2 C- STAR 12.2 C
Use and maintenance manual
( )
Turned on a The end of producTion line for a variable amounT of Time ThaT goes from
, , /
pelleT dusT ashes and or signs of combusTion in The brazier and in The combusTion chamber are
buT TheY show The added qualiTY ThaT
, bedrooms, bathrooms, garages, environments with an explosive
3
Rev.1 03/08/2017
Page 38
.
. TheY
e
lledi applies To The producTion
EN
15
To