Using External Programming; Window Open Function; Occupation Function - Thermor Émotion 4 Notice D'utilisation

The device follows the external control of your installation via pilot wire link.
Select Source prog. with
Choose Ext. control with
This function can not be used in BASIC mode
Used to detect variations in temperature related to the opening and closing of your windows.
If you forget to switch off your device when a window is open for a long time, this function
lets you get around this and prevents your device from heating up unnecessarily.
The device automatically switches to Frost Protection mode (7°C) when it detects an open
window and rises to the setpoint temperature when it detects that the window has been
closed (
We do not recommend using this function in corridors and rooms located near an entry
door which opens to the outside.
This function can not be used in BASIC mode
Enables heating of the room only when a person is present. The device applies the
recorded set temperature. The detection is not done below the sensor.
Ex : Your device is set to 19° C, in Comfort
mode (whether programme or not)
- 9:00, it detects your absence ;
- 9:30, its operating instructions are set to
18° C ;
- 10:00, its operating instructions are set to
17° C.

USING EXTERNAL PROGRAMMING

WINDOW OPEN FUNCTION

).

OCCUPATION FUNCTION

She is still active in AUTO mode
.
.
90°
90°
34
5 m
12 cm