Electrical Connection Of The Device - Thermor Émotion 4 Notice D'utilisation

ELECTRICAL CONNECTION OF THE DEVICE

Wiring rules
-
The device must be powered with single phase 230 V 50 Hz.
-
The power supply to the device must be directly connected to
the household power system after the circuit breaker and without
intermediate switch.
-
The unit will connect to the household power system through its
power cable via a power socket. In humid areas such as bathrooms and
kitchens, the power socket must be installed at 25 cm (9.8") minimum
-
Connection to the earth is prohibited. Do not connect the
INSTALLATION
27
EN