Installation; Preparing The Installation Of The Device - Thermor Émotion 4 Notice D'utilisation

PREPARING THE INSTALLATION OF THE DEVICE

Installation guidelines
- This device was designed to be installed in residential premises. In any
other case, please call your distributor.
- Installation must comply with the standards currently enforced in the
country of use.
- The device must be supplied with 230V single-phase 50Hz.
- In damp areas such as bathrooms and kitchens, you must install the
Keep the device away from any draughts that may interfere

Installation

e.g.: under a centrally controlled fan, etc...
50
25
50
25
12
50 cm
25 cm
Volume 1 No electrical device
Volume 2
Comply with the minimum distances
from any furniture units when posi-
tioning the device.
Do not install a shelf above vertical
devices.
To optimize the absence detection of
your device, avoid installing it in a closed
corner or behind a piece of furniture.
26
Class II IPX24 electri-
cal device (EN 60335-
2-43 : 2003/A2 : 2008)