Fitting The Appliance; Using The Appliance - Thermor Illico 3 Notice D'utilisation

FITTINg ThE APPlIANCE

196mm
Ø 6 mm / L : 35 mm
Insert the 2 upper screws, taking care to leave a gap of 8 mm between
the screw head and the wall;
If the appliance is fitted with towel bars, assemble this before hanging
the appliance on the wall.
Holding the appliance firmly, hang it on the two screws (before releasing
the appliance, check that it is fastened to the 2 screws).
Then secure the appliance with the lower screw.

USINg ThE APPlIANCE

20