Connection Diagram - Bradley 2901-287300 Manuel D'installation Et D'utilisation

www.bradleycorp.com
Clean the casing using a damp cloth moistened in a solution of neutral soap and water.
After cleaning the entire surface rinse the soap from the casing using another cloth
moistened in water and dry using a dry cloth.
Close the hand dryer by assembling the casing once more, tightening the screws that
fix the casing to the base and connect to the power grid.
Start the hand dryer up 2 or 3 times in a row to ensure that all remaining dust is
extracted.
ATTENTION: Take care at all times not to damage any component of the hand

CONNECTION DIAGRAM

DANGER.
Electric shock
risk
dryer.
- The installer must make sure that the electric system is
grounded in accordance with the law in force.
- Make sure that the electric system has a high-sensitivity
breaker I n ≤ 0.03 A.
- Make sure the machine is disconnected from electric
power supply, before performing maintenance operation.
- 6-