Télécharger Imprimer la page

Panasonic QuickDraw MC-V5491 Manuel D'utilisation page 34

Publicité

Primary Filter
Lid
Filter Screen
Couvercle
Tamis filtrant
Cubierta
Rejilla de filtro
Alignment Tabs
Onglets d'alignement
Guías de alineación
Alignment Tabs
Onglets d'alignement
Guías de alineación
Filter Removal and Cleaning
Filtre primaire
Filtro primario
Alignment Tabs
Onglets d'alignement
Guías de alineación
Check primary filter frequently and
clean when dirty.
Remove the dust bin assembly as
outlined in the DUST BIN CLEANING
section and empty contents of dust
bin.
Make sure dust bin is empty before
filter is removed.
Grasp filter screen, rotate counter-
clockwise and lift out.
Grasp primary filter, rotate counter-
clockwise and lift out.
Clean primary filter by gently tapping
over a trash container. Tap on
several sides to ensure best cleaning.
(Rinse with water only as needed)
The filter may be cleaned by tapping it
on a firm surface or by rinsing it under
a faucet. Rinse with water only, do not
use detergent or soap. Allow filter to
dry 24 hours before putting it back into
the dust bin.
When the cleaning of the filter no
longer restores vacuum suction to full
power you need to replace the filter.
To re-install the filter screen, align tabs
on filter screen with tabs on lid. Rotate
filter screen clockwise to lock in place.
- 34 -

Publicité

loading