Troubles; Alarm Memory - DSC HS2TCHP Guide De L'utilisateur

Masquer les pouces Voir aussi pour HS2TCHP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Troubles

Troubles
When a trouble condition is detected, the Trouble (
will beep every 10 seconds. Press the (
dition. The Trouble (
Troubles
Low Battery
Service
Bell Circuit
Required (Press
for more
General System Trouble
details)
General System Tamper
If the building and/or neighborhood has lost electrical power, the system
AC Loss
will continue to operate on battery for several hours.
Phone Trouble
The system has detected that the telephone line is disconnected.
Communication
The system attempted to communicate with the monitoring station, but
Failure
failed. This may be due to Telephone Line Fault.
The system is experiencing difficulties with one or more sensors on the
Zone Fault
system. Press to display the zone.
The system has detected a tamper condition with one or more sensors on
Zone Tamper
the system. Press to display the zone.
The system has detected a low battery condition with one or more mod-
Wireless Low
ules/sensors on the system. Press to display the zone, keypad, wireless key
Battery
(s) and RF Delinquency low battery conditions. Press again to see zone
troubles.
If complete power was lost (AC and Battery), the time and date will need
Loss of Clock
to be reprogrammed.

Alarm Memory

When an alarm occurs, the Alarm indicator flashes.
To view which sensor(s) generated the alarm, press Alarms.
The sensor number where the alarm occurred will be displayed (e.g., zone 3). Use the [<][>] scroll keys to
view the sensors in alarm memory. Press Back or Home to exit. To clear the memory, arm and disarm the sys-
tem. If an alarm sounded while armed, the keypad will automatically go to alarm memory when you disarm
the system. In this instance, you should approach with caution, as the intruder may still be within the build-
ing/premises.
) key to silence the beeps. Press (
) or System indicator will flash. The corresponding trouble will light up.
) or System indicator will turn on, and the keypad
Comments
General System Supervision
RF Jam Detected
Panel Low Battery
Panel AC Loss
- 15 -
) to view the trouble con-
Action
Call for
service
Call for
service
Call for
service
Call for
service
Call for
service
Call for
service
Call for
service
Reprogram
Time &
Date

Publicité

Table des Matières
loading

Table des Matières