Zone Status Indicators; Bypassed Zones; Bypassing Zones With A Hs2Tchp - DSC HS2TCHP Guide De L'utilisateur

Additional Options
Figure 5 - Zone Closed

Zone Status Indicators

Ready Zone is closed
Open The zone is open and needs to be closed

Bypassed Zones

Use the zone bypass feature when a zone is open but the system needs to be armed. Bypassed zones will not
cause an alarm when opened. Bypassing zones reduces the level of security. If you are bypassing a zone
because it is not functioning, call a service technician immediately so that the problem can be resolved and
your system returned to proper working order.
Ensure that no zones are unintentionally bypassed when arming your system. Zone bypassing can only be
performed while the system is disarmed. Bypassed zones are automatically canceled each time the system is
disarmed and must be bypassed again, if required, before the next arming.
Note: 24-hour zones can only be unbypassed manually.
Note: For security reasons, your installer has programmed the system to prevent certain zones from being
bypassed. (e.g., smoke detectors).

Bypassing Zones with a HS2TCHP

When in the Zone Status page, scroll up/down through the desired zones, and tap on the bypass icon to
bypass the zone. To unbypass a zone, tap the unbypass icon.
Note: For UL listed installations, zones can only be bypassed manually.
- 14 -