Care And Cleaning; Container; Motor Unit; Sponge Filter - TOOLCRAFT 1676582 Notice D'emploi

10. Care and cleaning

Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these can damage the
casing or even impair the function.
Always disconnect the product from the power supply before cleaning it.
a) Container
• Rinse the container with clean water.
• Clean the outside with a wet rag and a mild detergent.
• Allow the container to air dry.
b) Motor unit
• Make sure that no liquid gets into the inside of the motor unit.
• Clean the motor unit with a dry, soft, lint-free cloth.
c) Sponge filter
• Rinse the sponge filter with clear water.
• Allow the sponge filter to air dry.
d) Suction hose, tubes, suction nozzles
• Rinse these parts with clean water.
• Clean the outside with a wet rag and a mild detergent.
• Allow the parts to dry in the air.
Floor nozzle
For easier cleaning, you may remove the bottom with wiper and brush.
• Slide the upper side ends of the floor nozzle outwards.
• Remove the bottom.
• Slide the brush out to the side.
• Assemble the floor nozzle again following the reverse order.
33