Blower Function; Draining The Container Of Liquids - TOOLCRAFT 1676582 Notice D'emploi

d) Blower function
• Insert the connection piece of the suction hose into the air outlet. Rotate the connection piece to the right up to
the stop.
• The suction hose is properly attached when the mark with the recess is on top.
• To remove the suction hose, turn the connection piece to the left. Pull the connection piece out of the air outlet.
2.
1.
e) Draining the container of liquids
• In order to drain the tank, place the product over a drain and remove the locking cap.
• Before the next operation, make sure that the locking cap is installed properly.
32