Assembly; Removing/Installing Motor Unit - TOOLCRAFT 1676582 Notice D'emploi

15 Suction hose holder attachment
16 Rear storage area
17 Lower cable coil
18 Water outlet
19 Air intake tube
20 Container

8. Assembly

a) Removing/Installing motor unit
• Pull up the locking lever on both sides of the container. Fold the locking lever to the outside.
• Remove the motor unit from the container.
• Remove the internal accessories.
• When reinserting, the latch points of the motor unit must be aligned to the lock levers.
26
2.
1.
5.
21 Air filter lock
22 Air filter
23 Wall outlet
24 On/off button
25 Motor unit
26 Handle
3.
4.
6.
7.