Publicité
INSTALLING THE FRONT ACCESSORY HOLDER:
Parts Required:
4 x Screws (AA)
1 x #16 Front Accessory Holder
Tools Required:
Phillips Screwdriver
Hand start each of the four (4) screws (AA).
Using a Phillips screwdriver to secure firmly.
NOTE: DO NOT place or store any plastic or low heat
in this holder, for long periods.
INSTALLING THE BOTTLE OPENER AND TOP CABINET DOOR STOPPER:
Parts Required:
4 x Screws (BB)
Tools Required:
Large Phillips Screwdriver or
Phillips Drive Bit and Drill
The top cabinet door stopper has 2 magnetic strips to aid in the keep-
ing the cabinet doors closed. The top stopper installs to the bottom
skirt of the Upper cooking cabinet.
The bottle opener installs on the left hand side main frame
Hand start each of the four (4) screws (BB).
Using a Phillips screwdriver to secure firmly.
INSTALLING THE DOOR AND DRAWER HANDLES:
Parts Required:
6 x Screws (BB)
Tools Required:
Large Phillips Screwdriver or
Phillips Drive Bit and Drill
Both Cabinet Doors as well as the Grease Drawer require
the same size handles.
Hand start each of the six (6) screws (AA).
Using a Phillips screwdriver to secure firmly.
16
Assembly Instructions
1 x #26 Bottle Opener
1 x #17 Top Cabinet Stopper
.
1 x #13 Left Side Cabinet Door
1 x #14 Right Side Cabinet Door
1 x #18 Grease Drawer
3 x #11 Chrome Handles
16
Publicité
