Publicité
ASSEMBLING THE CART KIT AND COOKING CABINET
Step 2 Attach lifting handles
To aid in the installation process, the LG Elite 800 does come
complete with two (2) Upper Cabinet Lifting Handles, part #27.
Following the diagram, insert each of the handles into the
rear of the upper cabinet. Gentle lift on the handle to
secure in place.
NOTE: Before fully lifting, confirm stability and
strength of the handle installation.
WARNING!
NOTE:
Damaged caused due to
Step 3 Attach the cabinets
To aid in the installation process, use the two (2) Upper Cabinet
Lifting Handles, part #27. and the grease tray access hole.
It is recommended to wear gloves
Following the diagram, lift the upper cooking cabinet up
and directly over the four (4) legs.
Slowly begin to lower the cabinet onto the legs. The legs
are designed to fit inside of the upper cabinet.
When fitted properly the upper cabinet should be sitting
flush on the to the lower cabinet panels.
Step 4 Secure the cabinets
You will require sixteen (16) screws (AA) and a Phillips screw driver.
Starting on one corner, line up the face panel of the upper cooking
cabinet with the four (4) holes in each leg.
Hand start each of the four (4) screws (BB) through the panel and
into each leg.
Using a Phillips head driver, firmly secure each screw.
Repeat procedure for the remaining three (3) sides.
10
Assembly Instruction
Due to the size and weight
of the upper cooking
cabinet, the following
installation step is a two (2)
person job.
ignoring warning or
improper installation is
NOT a warranty issue.
C
c
10
Publicité
