Publicité
3. If the programme has a prewash phase,
put a small quantity of detergent on the
inner part of the appliance door.
4. Close the lid. Make sure that the lid locks
into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a load
with normal soil.
The upper ends of the two vertical ribs
inside the compartment (B) indicate the
maximum level for filling the dispenser
with gel (max. 30ml).
10.2 Remote start
Activate this function to remotely control and
monitor your dishwasher in the app.
How to activate the remote start
Make sure that the indicator
and your dishwasher is added in the app. If
not, refer to "Wireless connection" chapter.
1. Press
.
• The light related to the button is on.
• The display shows APP.
2. Close the appliance door.
3. Use the app to remotely operate the
appliance.
Opening the door deactivates the remote
start. Refer to the information provided
further in this chapter.
How to deactivate the remote start
Press
until the display shows 0h.
• The light related to the button is off.
• The appliance returns to the
programme selection.
18
ENGLISH
10.3 How to select and start a
programme using MY TIME
selection bar
1. Slide your finger across MY TIME
selection bar to choose a suitable
programme.
• The light related to the selected
programme is on.
• The ECOMETER indicates the level of
energy and water consumption.
• The display shows the programme
duration.
2. Activate applicable EXTRAS if desired.
3. Close the appliance door to start the
programme.
10.4 How to select and start the
programme
1. To select
• The light related to the button is on.
• The ECOMETER is off.
• The display shows the programme
duration.
2. Close the appliance door to start the
programme.
is on
10.5 How to activate EXTRAS
Options must be activated every time before
you start a programme. It is not possible to
activate or deactivate options while a
programme is running. Not all options are
compatible with each other.
1. Select a programme using MY TIME
selection bar.
2. Press the button dedicated to the option
you want to activate.
• The light related to the button is on.
• ECOMETER and programme duration
are updated.
Activating options often increases water
consumption, energy consumption and
programme duration.
Pre-rinse
Pre-rinse, press and hold
for 3 seconds.
Publicité
