Publicité
8. Re-fit the upper hinge while refitting the upper door. Do not fully tighten
the screws.
9. Check the door is aligned horizontally and vertically and that all seals make
good contact with the cavity all the way around the cavity opening before
finally tightening the hinges. Re-fit the hinge cover and screw cover. Re-
adjust the levelling feet, if necessary.
10. Detach the door gasket and then attach it after rotating.
62
PLF244LOG_IB.indd 62
PLF244LOG_IB.indd 62
6/11/2023 11:24 AM
6/11/2023 11:24 AM
Publicité
