Modello - Model - Modèle
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
32. POWER-ON
After closing the door, plug the vending machine into the mains socket .
At this point the message appears on the touch display and auto-configuration is activated, which checks all the previous settings.
If a drawer is NOT inserted correctly, the display will signal the error by turning yellow (see image); once the drawer has been
correctly repositioned and the door closed, the display will auto configure and if there is no error the screen will be blank.
BRERA PRO / BRERA SLAVE PRO / BRERA BOOST
CHELSEA PRO / CHELSEA BOOST
TROCADERO PRO / TROCADERO BOOST
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
WARNING! Only load the drawers with the products indicated in
the figure.
Position the bags making sure that their ends will not become entan-
gled during feeding.
3 9 / 1 0 8
PAGE
N° DOC
Snacks
Snacks
Snacks
Bottles / Snacks
Bottles / Snacks
Cans / Cartons
UM000758