Modello - Model - Modèle
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
•
Remove the internal separator.
•
Insert the bottle side separator.
•
Insert the internal separator again.
•
Screw the nuts into the bottom of the drawer.
•
Screw the drawer stop.
31. TRAYS SUPPLY
General tips for good operation:
•
Make sure that the products are free to move.
•
If possible, do not place bags side by side if their ends
could become entangled during feeding.
•
Load cans into the lowest drawer.
Products supply
•
Open the door and pull the trays out until they stop.
•
Supply products starting from the innermost part (motor
side), until there is no available space left on any spiral.
•
Bottles must be loaded with the cap facing down.
BRERA PRO / BRERA SLAVE PRO / BRERA BOOST
CHELSEA PRO / CHELSEA BOOST
TROCADERO PRO / TROCADERO BOOST
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
3 8 / 1 0 8
PAGE
UM000758
N° DOC