Publicité
Measurement
®
Initio
2 Joulemeter
Ref : 292 087
6.1 Installation of the WIFI module
The WIFI module is fitted with the Initio
6.2 Visualisation on a tablet
Once the WIFI module is installed, the tablet must be configured:
Information concerning the module is output to the screen.
7. Parameters
Various information concerning the Initio
selecting Parameter Information
This page displays the serial number of the instrument and the software version, the battery
charge level and the operating language. The latter is changed by turning the knurled knob.
8. Update
On our website at the address
software.html, the last update for your Initio
designation.
In order to know the version of your Initio
"Informations".
ENGLISH
-
Lift the Initio
®
2 handle
-
Remove the back by sliding it down
-
Position the WIFI module instead of the back
-
Push the module firmly into place until it clicks. It must be possible to retract the handle
without forcing it.
-
Press the Menu button
-
Select Parameters
-
Select Network
-
On the tablet, chose the name of the WIFI network displayed on the Initio
-
Open a web browser
-
Enter the address displayed by the Initio
®
2 switched off.
®
2 in the address bar of the browser.
®
2 can be obtained by pressing on Menu and
http://en.jeulin.fr/en-resources/english-resources/software/free-
®
2 is available. Its version is indicated in the
®
2, press the "Menu" button and then "Setup"
13
2.
®
Publicité
