Publicité
Measurement
®
Initio
2 Joulemeter
Ref : 292 087
2.1 Putting into use
The measurement displays directly on the instrument screen.
2.2 Navigation
Initio
The central knurled knob (3) is for moving between the menus of the Initio
the OK button in the center of the knurled knob confirms the selection.
The "Back" button (2) makes it possible to change from one type of display to another from
the main screen in the following order:
Within a menu it is used to go back a step.
This button displays the main menu of the Initio
2.3 Changing measurement type
The joulemeter measures various physical values
Changing value
To switch from one measurement to the next:
TRMS - Direct Selection:
For measurement of current or voltage, it is possible to measure the direct or TRMS value.
To modify the mode:
ENGLISH
-
Press the start button (1) situated on the left side of the instrument.
-
To switch off the Initio
make your selection and confirm by pressing the knurled knob (3).
2 has three navigation buttons:
®
-
Selection-confirmation (3):
-
Back (2):
-
Measurement
-
Table
-
Chart
-
Menu (4):
-
Intensity
-
Voltage
-
Power consumed
-
Energy consumed
-
Go to the Measurement screen
-
Using the knurled knob, select the measurement symbol in the top left
-
Briefly press the knurled knob to change the value
-
Go to the Measurement screen
-
Select TRMS or Direct in the top left of the screen
-
Briefly press the knurled knob to modify the mode
®
2, briefly press the start button (1), turn the knurled knob to
®
2.
9
2. Briefly pressing
®
Publicité
