DeWalt DW088 Traduction De La Notice D'instructions Originale page 31


WARNING: Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.

WARNING! DO NOT DISASSEMBLE THE LASER. There are no user serviceable parts
inside. Disassembling the laser will void all warranties on the product. Do not modify
the product in any way. Modifying the tool may result in hazardous laser radiation exposure.

WARNING: Fire hazard ! Avoid short-circuiting the contacts of a removed battery.
Additional Safety Instructions for Lasers
• This laser complies with class 2 according to IEC/EN 60825-1:2014. Do not replace a laser
diode with a different type. If damaged, have the laser repaired by an authorised repair agent.
• Do not use the laser for any purpose other than projecting laser lines.
• An exposure of the eye to the beam of a class 2 laser is considered safe for a maximum of
0.25 seconds. Eyelid reflexes will normally provide adequate protection.
• Never look into the laser beam directly and intentionally.
• Do not use optical tools to view the laser beam.
• Do not set up the tool at a position where the laser beam can cross any person at
head height.
• Do not let children come in contact with the laser.
Residual Risks
The following risks are inherent to the use of this device:
• injuries caused by staring into laser beam.
Labels on the tool
The following pictographs are shown on the tool:
Read the instruction manual before use.
Laser warning.
EnGLIsh
31