Publicité
9. Guide the mains connection cable
(external)
the light base
that the double isolation of the mains
connection cable (external)
fully into the light base
10. Connect the mains connection cable
(external)
(see Fig. F). Be sure that the colours
[
9 ]
of the connected lines match (L or 2 =
black or brown, N or 1 = blue or white).
Protection class 2: This light is specially
insulated and must not be connected to a
protective conductor.
11. Screw the locking nut
cable outlet tight. Make sure that the
rubber seal tightly surrounds the mains
connection cable (external)
24 GB/IE/NI
through the cable outlet in
8 ]
[
(see Fig. F). Make sure
5 ]
[
using the lustre terminal
8 ]
[
reaches
8 ]
[
.
5 ]
[
on the
6 ]
[
.
8 ]
[
Publicité
