Télécharger Imprimer la page

KWC AQUA3000OPEN ZAQUA018 Notice De Montage Et De Mise En Service page 3

Publicité

A3000 open Temperature Sensor
ZAQUA018 ................................hot-water side (red)
ZAQUA019 ................................cold-water side (blue)
Please refer to the graphics in the German Installation and Operating Instructions.
1.
Warranty
Liability is accepted according to the General Terms and Conditions of Business and
Supply.
Only use original replacement parts!
2.
Application
Temperature sensor for application with A3000 open fittings for recording
temperatures with a PT1000 sensing element. Design for water flow volume
regulator.
• Hot-water side (red), to monitor thermal disinfection at the discharge fitting.
• Cold-water side (blue), for temperature monitoring at the discharge fitting and
providing a means for automatic, temperature-controlled hygiene flushing.
3.
Dimensions
4.
Assembly Instructions
To obtain an improved heat flow, it is recommended to place a few drops of heat
transfer compound (to be provided by the customer) into the water volume regulator
(b).
4.1
Place the temperature sensor (a) into the water volume regulator (b).
4.2
Place the soft-binder (c) around the water volume regulator and hook it in.
4.3
Connect the temperature sensor (a) to the electronic module (d).
0English
- 3 -
EN

Publicité

loading

Ce manuel est également adapté pour:

Aqua3000open zaqua01920001009732000100974